Linksys RV082

From X-Wrt

Jump to: navigation, search

Linksys RV082

Boot Log: 

Version 1.1.6
Booting an active image in 3 seconds
http open success!
open DHCP Server for dev ixp0
Uncompressing Linux..............................................................................................................................................................
Linux version 2.4.19openrg-rmk6-ds1 #18 ¶g붤­ 6¤ë 20 18:38:24 CST 2008
CPU: Intel XScale-IXP425 revision 2
Machine: Intel IXP425 IXDP425
Warning: bad configuration page, trying to continue
initrd (0xc0158000 - 0xc015e000) extends beyond physical memory - disabling initrd
Security risk: creating user accessible mapping for 0xc8000000 at 0xff000000
Security risk: creating user accessible mapping for 0xc0000000 at 0xff00c000
Security risk: creating user accessible mapping for 0xc4000000 at 0xff00d000
Security risk: creating user accessible mapping for 0x60000000 at 0xff00f000
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,115200 root=/dev/ram0 rw
Using IXP425 Timer 0 as timer source
Calibrating delay loop... 532.48 BogoMIPS
Memory: 32MB = 32MB total
Memory: 26044KB available (1212K code, 5078K data, 44K init)
XScale Cache/TLB Locking Copyright(c) 2001 MontaVista Software, Inc.
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd

Random: 0xab6ae863
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xff000003 (irq = 15) is a IXP425 UART
ttyS01 at 0xff001003 (irq = 13) is a IXP425 UART
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
PPP MPPE compression module registered
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 24K
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 44K
Mounting cramfs image at 'cramfs'
insmod: add-symbol-file PATH/kos_lib.o 0xc280f060 -s .data 0xc28126f4 -s .bss 0xc281281c
insmod: add-symbol-file PATH/ixp425_flash_mod.o 0xc2814060 -s .dUsing buffer write method
ata 0xc28143ec -s .bss 0xc2814470
Using predefined MTD partitions.
Creating 1 MTD partitions on "ixp425 Flash":
0x00000000-0x01000000 : "openrg"
Press ESC to enter BOOT MENU mode.
Start convert_switch
Start convert_dual_wan
Start convert_static_route
insmod: add-symbol-file PATH/csr.o 0xc3838060 -s .data 0xc38555c8 -s .bss 0xc385c5b4
Module init.
insmod: add-symbol-file PATH/ixp425_csr_init_mod.o 0xc38bc060 -sInitialising Queue Manager...
.data 0xc38bc4d8 -s .bss 0xc38bc4dc
ERROR: ipsec_hwaccel_add_service: Invalid function pointers!
Intel CSR QMGR & NPE(s) init done.
insmod: add-symbol-file PATH/ixp425_eth_mod.o 0xc38be060 -s .datInitializing ixp425_eth driver 0.0.8
a 0xc38c06a4 -s .bss 0xc38c085c
PHY 0 MAC address is:   04:04:04:04:04:04
PHY 1 MAC address is:   06:06:06:06:06:06
ixp0[c38c0868] port_id[0] vlanid[1]
ixp1[c38c09b0] port_id[1] vlanid[2]
ixp2[c38c0af8] port_id[1] vlanid[3]
insmod: add-symbol-file PATH/nk_switch.o 0xc38c4060 -s .data 0xcunknown CPU version [690541c2]
38c7944 -s .bss 0xc38c830c
RV082 HW Version 0
insmod: add-symbol-file PATH/nk_loading.o 0xc38cb060 -s .data 0xc38cb628 -s .bss 0xc38cb6bc
insmod: add-symbol-file PATH/nk_ipsec_dev.o 0xc38cd060 -s .data 0xc38cdaa4 -s .bss 0xc38cdb8c
insmod: add-symbol-file PATH/igmp_proxy_mod.o 0xc38cf060 -s .data 0xc38d050c -s .bss 0xc38d0588
insmod: add-symbol-file PATH/log_chardev.o 0xc38d2060 -s .data 0xc38d2ab0 -s .bss 0xc38d2ba8
insmod: add-symbol-file PATH/ipfilter.o 0xc38d5060 -s .data 0xc38eb3fc -s .bss 0xc38ecbc0
insmod: add-symbol-file PATH/rg_bridge.o 0xc38f4060 -s .data 0xc38f883c -s .bss 0xc38f8868
insmod: add-symbol-file PATH/tcp_mss.o 0xc38fc060 -s .data 0xc38fc324 -s .bss 0xc38fc340
insmod: add-symbol-file PATH/rg_dhcp_pktfil.o 0xc38fe060 -s .data 0xc38feaec -s .bss 0xc38febb4
insmod: add-symbol-file PATH/rg_auth1x_pktfil.o 0xc3900060 -s .data 0xc3901298 -s .bss 0xc39012e0
insmod: add-symbol-file PATH/rg_ipv4.o 0xc3903060 -s .data 0xc39IPV4 device driver registered
03214 -s .bss 0xc3903252
insmod: add-symbol-file PATH/krgldr_module.o 0xc3905060 -s .data 0xc390525c -s .bss 0xc3905284
insmod: add-symbol-file PATH/nb_rt.o 0xc3907060 -s .data 0xc39074c8 -s .bss 0xc390751c
insmod: add-symbol-file PATH/url_filter_mod.o 0xc3909060 -s .data 0xc390aab8 -s .bss 0xc390ac50
rt_cache_flush[lo]
do rt_run_flush now[lo]
rt_run_flush[lo]
fib_inetaddr_event[lo]
do rt_run_flush now[lo]
rt_run_flush[lo]
fn_hash_delete2[0]
do rt_run_flush after[879][<NULL>]
fib_del_ifaddr:fib_flush[lo]
fib_flush[0]
do rt_run_flush after[880][<NULL>]
fib_disable_ip[lo]
do rt_run_flush now[lo]
rt_run_flush[lo]
fib_inetaddr_event[lo]
do rt_run_flush now[lo]
rt_run_flush[lo]

 port ID is:0

 port Number is:80
set time to RTC
switch cmd[1]
adm699x_2 : frontport[1]->switchport[1]
auto [8c0f]
switch cmd[1]
adm699x_2 : frontport[3]->switchport[3]
auto [880f]
    port[1] group[1] tmp_group[1] vlan_member[0xffff]switch cmd[5]


vlanid[1]-->ffff
switch cmd[0]
adm699x_1 : frontport[1]->switchport[1]
auto [848f]
    port[2] group[1] tmp_group[1] vlan_member[0xffff]switch cmd[5]


vlanid[1]-->ffff
switch cmd[0]
adm699x_1 : frontport[2]->switchport[3]
auto [848f]
    port[3] group[1] tmp_group[1] vlan_member[0xffff]switch cmd[5]


vlanid[1]-->ffff
switch cmd[0]
adm699x_1 : frontport[3]->switchport[5]
auto [848f]
    port[4] group[1] tmp_group[1] vlan_member[0xffff]switch cmd[5]


vlanid[1]-->ffff
switch cmd[0]
adm699x_1 : frontport[4]->switchport[7]
auto [848f]
    port[5] group[1] tmp_group[1] vlan_member[0xffff]switch cmd[5]


vlanid[1]-->ffff
switch cmd[0]
adm699x_1 : frontport[5]->switchport[0]
auto [848f]
    port[6] group[1] tmp_group[1] vlan_member[0xffff]switch cmd[5]


vlanid[1]-->ffff
switch cmd[0]
adm699x_1 : frontport[6]->switchport[2]
auto [848f]
    port[7] group[1] tmp_group[1] vlan_member[0xffff]switch cmd[5]


vlanid[1]-->ffff
switch cmd[0]
adm699x_1 : frontport[7]->switchport[4]
auto [848f]
    port[8] group[1] tmp_group[1] vlan_member[0xffff]switch cmd[5]


vlanid[1]-->ffff
switch cmd[0]
adm699x_1 : frontport[8]->switchport[6]
auto [848f]
switch cmd[6]
enable watchdog
switch cmd[13]
wd_tick enable
IP Filter: initialized.  Default = block all
t->buffers[0].ip.sin_addr = 0
t->buffers[0].udp_fd = 6
t->buffers[1].ip.sin_addr = 0
t->buffers[1].udp_fd = 7
t->buffers[2].ip.sin_addr = 0
t->buffers[2].udp_fd = 8
whack_msg_send:755: failed to send control message to pluto (No such file or directory)
ixp1 - 0:16:b6:8c:94:7
port_enable(ixp1)
PHY 1 MAC address is:   00:16:b6:8c:94:07
ixp1: Entering promiscuous mode
Enable port ixp1
rt_cache_flush[ixp1]
do rt_run_flush now[ixp1]
rt_run_flush[ixp1]
ixp2 - 0:16:b6:8c:94:8
port_enable(ixp2)
PHY 1 MAC address is:   00:16:b6:8c:94:08
ixp2: Entering promiscuous mode
Enable port ixp2
rt_cache_flush[ixp2]
do rt_run_flush now[ixp2]
rt_run_flush[ixp2]
ixp0 - 0:16:b6:8c:94:6
port_enable(ixp0)
PHY 0 MAC address is:   00:16:b6:8c:94:06
ixp0: Entering promiscuous mode
Enable port ixp0
rt_cache_flush[ixp0]
do rt_run_flush now[ixp0]
rt_run_flush[ixp0]
fib_inetaddr_event[ixp0]
do rt_run_flush now[ixp0]
rt_run_flush[ixp0]
mt_fw_notify mt_fw_reconf16:51, 19 September 2008 (CDT)16:51, 19 September 2008 (CDT)16:51, 19 September 2008 (CDT)16:51, 19 September 2008 (CDT)~~
rt_cache_flush[ixp0]
do rt_run_flush now[ixp0]
rt_run_flush[ixp0]
---------------------------------------------
doing nk_update_route(ixp0,DEV_IF_ST_UP)
---------------------------------------------
dualwan_slb_primary_wan=0

dualwan_type[2]
flush addr findkey[c0a80101]
                            ---------------------------------------------
done nk_update_route(ixp0,DEV_IF_ST_UP)
---------------------------------------------

addrc_cache_flush
flush_cache get addr[c0a80101] cp_char[3]flush causch count[32]flush_causch mask[ffffffff]rt_cache_flush[ixp0]
do rt_run_flush now[ixp0]
rt_run_flush[ixp0]
Could not bind socket for snmp agent on IP 192.168.1.1
new nsd database is exist , nothing to convert
switch cmd[4]
Create certificate file for Https-stunnel...
Https-stunnel was started.
nk_tm_lm : stop license management ...
--- System is up! ---
Firmware: v1.3.98-tm
2008/9/8 14:50:4
nk_VpnTunnelGet
 Max Max nk_vpnTunnelEnabledCoun
t is [0]
 Max Max  TunnelNum == 0
 Max Max pool->pool_size_max [20000]nk_check_resource_vpn
 Max Max nk_check_resource_vpn [
0]retVal
 Max Max pool->pool_size_max [20000]nk_check_resource_qvpn
 Max Max nk_check_resource_qvpn
[0]retVal
nk_PptpTunnelGet
 Max Max nk_pptpTunnelEnabledCount Max Max pool->pool_size_max [20000] is [0]
rs_conn_timeout[1] cache_size[262144]
nk_check_resource_pptp
Max Max nk_check_resource_pptp [0]retVal
 
ipfilter reconf start, drop all packet
name[0][ixp1]
name[1][ixp2]
Add LAN network[c0a80100][ffffff00]
Firewall check [ixp2][OK]
Firewall check [ixp1][OK]

ipfilter reconf done, start checking packet!!
Username:
Retrieved from "http://wiki.x-wrt.org/index.php/Linksys_RV082"
Personal tools