WDS

From X-Wrt

The setup for wds has changed in kamikaze. This guide will show how to setup 2 broadcom routers in wds.

Step One:

Set your first interface in AP mode like so

Step Two:

Now click on "Add a Virtual Interface"

Set the mode of your new virtual interface to WDS

Next put in the bssid(mac address) of the wireless interface of your other wds node. NOTE: Kamikaze can handle wds with either the essid or the bssid, this guide will use the bssid. My build of kamikaze (7.09) required an SSID to save the settings, I put the same SSID as my wireless network.

Your setup should now look similar to this:

Step Three:

Now you will repeat steps one and two for your other wds node.

It should look like

Thats it, save and apply the changes and you should have a working wds connection.